6 . 12 . 85 Official Journal of the European Communities No L 327 / 35
II
(Acts whose publication is not obligatory)
COUNCIL
DECISION OF THE REPRESENTATIVES OF THE GOVERNMENTS OF THE MEMBER
STATES OF THE EUROPEAN COAL AND STEEL COMMUNITY, MEETING WITHIN THE
COUNCIL,
of 18 November 1985
establishing ceilings and Community supervision for imports of certain goods originating in
Yugoslavia ( 1986)
85 / 522 / ECSC
THE REPRESENTATIVES OF THE GOVERNMENTS OF
THE MEMBER STATES OF THE EUROPEAN COAL AND
STEEL COMMUNITY , MEETING WITHIN THE COUNCIL ,
In agreement with the Commission ,
HAVE DECIDED AS FOLLOWS :
Community and the Socialist Federal Republic of
Yugoslavia ( 2 ).
Goods shall be set off against the ceilings only if the
movement certificate has been submitted before the date on
which customs duties are reimposed .
The reaching of a ceiling shall be determined at
Community level on the basis of imports set off against it in
the manner defined in the preceding subparagraphs .
The Member States shall periodically inform the
Commission of imports effected in accordance with the
above rules ; such information shall be supplied under the
conditions laid down in paragraph 4 .
3 . As soon as the ceilings are reached at Community
level , Member States may at any time , at the request of any
one of them or of the Commission , and in respect of the
whole of the Community , reintroduce the levying of the
customs duties applicable to third countries .
Within the framework of the foregoing provisions , the
Commission shall coordinate the procedures for
reintroducing the customs duties applicable to third
countries , in particular by notifying the date common to
the whole of the Community and directly applicable in each
Member State . This notification shall be published in the
Official Journal of the European Communities .
4 . Member States shall forward to the Commission , not
later than the 15th day of each month , statements of the
Article 1
1 . Imports of certain products originating in Yugoslavia
and indicated in Article 3 of the Agreement between the
Member States of the European Coal and Steel
Community , of the one part , and the Socialist Federal
Republic of Yugoslavia , of the other part ( J ), shall be
subject to annual ceilings and to Community supervision in
the Community of Ten from 1 January to 31 December
1986 .
The description of the goods referred to in the preceding
subparagraph , their tariff headings and statistical numbers
and the levels of the indicative ceilings are given in the
Annex hereto .
2 . Amounts shall be set off against the ceilings as and
when the goods are entered with customs authorities for
free circulation and accompanied by a movement certificate
conforming to the rules contained in Protocol 3 to the
Cooperation Agreement between the European Economic
(') OJ No L 41 , 14 . 2 . 1983 , p. 113 . ( 2 ) OJ No L 41 , 14 . 2 . 1983 , p. 2 .
No L 327 / 36 Official Journal of the European Communities 6 . 12 . 85
amounts set off during the preceding month . They shall , if
the Commission so requests , make up such statements for
periods of 10 days and forward them within five clear days
of expiry of the preceding 10-day period .
Article 2
Member States and the Commission shall cooperate closely
to ensure that this Decision is complied with .
Article 3
Member States shall take all measures necessary to
implement this Decision .
Done at Brussels , 18 November 1985 .
The President
M. FISCHBACH
6 . 12 . 85 Official Journal of the European Communities No L 327 / 37
ANNEX
Order
No
CCT
heading
No
Description NIMEXE code
Level of
ceiling
( tonnes )
1 2 3 4 5
1 73.01
73.01-10
73.01-21 , 23 , 25 , 27
73.01-31 , 35
22 024
Pig iron , cast iron and spiegeleisen , in pigs , blocks , lumps and
similar forms :
A. Spiegeleisen
B. Haematite pig iron and cast iron
C. Phosphoric pig iron and cast iron
D. Other pig iron and cast iron :
II . Other
Iron or steel coils for re-rolling
73.01-49
73.08-all Nos2 73.08 31 974
73.103 Bars and rods ( including wire rod ), of iron or steel , hot-rolled ,
forged , extruded , cold-formed or cold-finished ( including
precision-made ); hollow mining drill steel :
A. Not further worked than hot-rolled or extruded 73.10-11 , 12 , 14 , 15 ,
17 > 21 068
D. Clad or surface-worked ( for example , polished , coated):
I. Not further worked than clad :
a ) Hot-rolled or extruded 73.10-42
4 73.11
73.11-11 , 12 , 14 , 16 ,
19
Angles , shapes and sections , of iron or steel , hot-rolled , forged ,
extruded , cold-formed or cold-finished ; sheet piling of iron or
steel , whether or not drilled , punched or made from assembled
elements :
A. Angles , shapes and sections :
I. Not further worked than hot-rolled or extruded
IV . Clad or surface-worked ( for example , polished ,
coated ):
a ) Not further worked than clad :
1 . Hot-rolled or extruded
B. Sheet piling
3 007
73.11-41
73.11-50
5 73.12
73.12-11 , 19
73.12-21
6 214
Hoop and strip , of iron or steel , hot-rolled or cold-rolled :
A. Not further worked than hot-rolled
B. Not further worked than cold-rolled :
I. In coils for the manufacture of tinplate
C. Clad , coated or otherwise surface-treated :
III . Tinned :
a ) Tinplate
V. Other ( for example , copper-plated , artificially oxidized ,
lacquered , nickel-plated , varnished , clad , parkerized ,
printed ):
a ) Not further worked than clad :
1 . Hot-rolled
73.12-51
73.12-71
No L 327 / 38 Official Journal of the European Communities 6 . 12 . 85
Order
No
CCT
heading
No
Description NIMEXE code
Level of
ceiling
( tonnes)
1 2 3 4 5
73.136
73.13-11 , 16
73.13-17 , 19 , 21 , 23 ,
26 , 32 , 34 , 36
Sheets and plates , of iron or steel , hot-rolled or cold-rolled :
A. 'Electrical ' sheets and plates
B. Other sheets and plates :
I. Not further worked than hot-rolled
II . Not further worked than cold-rolled , of a thickness
of:
b ) More than 1 mm but less than 3 mm
c) 1 mm or less
III . Not further worked than burnished , polished or
glazed
IV . Clad , coated or otherwise surface-treated :
b ) Tinned
c ) Zinc-coated or lead-coated
d ) Other ( for example , copper-plated , artificially
oxidized , lacquered , nickel-plated , varnished , clad ,
parkerized , printed )
V. Otherwise shaped or worked :
a ) Cut into shapes other than rectangular shapes , but
not further worked :
2 . Other
38 535
73.13.-43 , 45
73.13-47 , 49
73.13.-50
73.13-64 . 65
73.13-67 , 68 , 72 , 74
73.13-76 , 78 , 79 , 82 ,
84 , 86 , 87 , 88 ,
89
73.13-92
7 73.15
73.61-20 , 50
73.62-10
73.62-30
73.63-21 , 29
73.63-72
73.64-20
73.64-72
73.65-21 , 23 , 25
Alloy steel and high carbon steel in the forms mentioned in
heading Nos 73.06 to 73.14 :
A. High carbon steel :
I. Ingots , blooms , billets , slabs and sheets bars :
b ) Other
III . Coils for re-rolling
IV . Universal plates
V. Bars and rods ( including wire rod ) and hollow mining
drill steel ; angles , shapes and sections :
b ) Not further worked than hot-rolled or extruded
d ) Clad or surface-worked ( for example , polished ,
coated):
1 . Not further worked than clad :
aa ) Hot-rolled or extruded
VI . Hoop and strip :
a ) Not further worked than hot-rolled
c ) Clad , coated or otherwise surface-treated :
1 . Not further worked than clad :
aa ) Hot-rolled
VII . Sheets and plates :
a ) Not further worked than hot-rolled
b ) Not further worked than cold-rolled , of a
thickness of:
2 . Less than 3 mm
c) Polished , clad , coated or otherwise surface
treated
d ) Otherwise shaped or worked :
1 . Cut into shapes other than rectangular shapes ,
but not further worked
73.65-55
73.65-70
73.65-81 > 20 992
6 . 12 . 85 Official Journal of the European Communities No L 327 / 39
Order
No
CCT
heading
No
Description NIMEXE code
Level of
ceiling
( tonnes )
21 3 4 5
7 73.15
(cont 'd) (cont 'd)
73.71-23 , 24 , 29
73.71-51 , 52 , 54 , 55 ,
56 , 59
73.72-11 , 13 , 19
73.72-33 , 39
73.73-23 , 24 , 25 , 26 ,
29 , 33 , 34 , 35 ,
36 , 39
B. Alloy steel :
I. Ingots , blooms , billets , slabs and sheet bars :
b ) Other :
1 . Ingots :
bb ) Other
2 . Blooms , billets , slabs and sheet bars
III . Coils for re-rolling
IV . Universal plates
V. Bars and rods ( including wire rod ) and hollow mining
drill steel ; angles , shapes and sections :
b ) Not further worked than hot-rolled or extruded
d ) Clad or surface-worked ( for example , polished ,
coated ):
1 . Not further worked than clad :
aa ) Hot-rolled or extruded
VI . Hoop and strip :
a ) Not further worked than hot-rolled
c) Clad , coated or otherwise surface-treated :
1 . Not further worked than clad :
aa ) Hot-rolled
VII . Sheets and plates :
a ) 'Electrical ' sheets and plates
b ) Other sheets and plates :
1 . Not further worked than hot-rolled
73.73-72
73.74-21 , 23 , 29
73.74-72
73.75-11 , 19
73.75-23 , 24 , 29 , 33 ,
34 , 39 , 43 , 44 ,
49
73.75-63 , 64 , 69
73.75-73 , 79
2 . Not further worked than cold-rolled , of a
thickness of:
bb ) Less than 3 mm
3 . Polished , clad , coated or otherwise surface
treated
4 . Otherwise shaped or worked :
aa ) Cut into shapes other than rectangular
shapes , but not further worked 73.75-83 , 84 , 89
Full & Egal Universal Law Academy